cooling tube
英 [ˈkuːlɪŋ tjuːb]
美 [ˈkuːlɪŋ tuːb]
散热管
双语例句
- As a novel modular cooling apparatus, adsorption cooling tube and its application study is an important side of solid adsorption refrigeration research field.
其中，作为一种新型单元式微型化的制冷器件，固体吸附式冷管及其应用研究是吸附制冷研究领域中的一个重要方面。 - Study on the prediction method of corrosion remaining life of the cooling tube of marine condenser
船用冷凝器冷却管的腐蚀剩余寿命预测方法研究 - Desorption Experiment and 2D Simulation on the Solar Cooling Tube
太阳能冷管吸附床脱附试验及二维模拟 - The utility model is composed of an annular permanent magnet ( 1), a magnetic conductive gasket ( 2), and a cooling tube, which are arranged in a circular column target pipe.
在圆柱靶管中装入环状永磁铁（1）、导磁垫片（2）以及冷却管组成。 - A novel solid adsorption cooling tube driven by waste heat is proposed in the paper.
回热器是脉管制冷机的关键部件之一，其效率对脉管制冷机性能有很大影响。 - The paper analyzed the influence of the cooling tube on the process of heating billet and temperature field of the billet in detail.
在验证数学模型正确可信的基础上分析了冷却水管对钢坯传热过程和钢坯温度场的影响。 - Connect the blower motor cooling tube to the nipple on the blower motor housing.
连接吹风机马达冷却管到吹风机马达罩上的短管。 - Reasons of Condenser Top Cooling Tube Cracking
凝汽器顶部冷却管断裂原因分析 - It is believed from experience and analysis that the brass tube can not be used as cooling tube in condenser if the reclaimed water to be reused for the the circulatory cooling water system;
通过经验和分析认为，若中水回用于循环冷却系统，凝汽器冷却管不能采用黄铜管； - The effect of recharge quantity of refrigerant ( adsorbate) under the condition of keeping the adsorbent quantity constant on performance of the cooling tube is studied in the paper.
研究了在吸附剂量不变的情况下，制冷剂（吸附质）充注量对制冷管性能的影响。 - Based on accumulated corrosion data and the analytical report on naval condenser cooling tubes the authors have set up a reliability mathematical model for Bfe 30 1 1 cooling tube corrosion life assessment. The reliable service life of the main condenser cooling tubes has also been predicted.
文中结合积累的腐蚀数据和某舰船用冷凝器剖管分极报告，建立了BFe30－1－1冷却管腐蚀寿命的可靠性数学模型，并预测了主冷凝器冷却管的可靠使用寿命。 - Refrigerating Characteristics of the Adsorption Cooling Tube With Different refrigerant charging
制冷剂充灌量对吸附式制冷管的制冷特性的影响 - The refrigerating identity of an adsorption cooling tube applied in mobile machinery shop air conditioning is researched in this paper.
本文研究了一种应用于工程车司机驾驶室的新型制冷管的制冷性能。 - A novel adsorption cooling tube is designed and manufactured, using CaCl_2-NH_3 as the adsorption working pairs.
在针对余热吸附式冷管前期研究成果的基础上，以CaCl2-NH3为吸附工质对设计制作了一种新颖的吸附式冷管。 - Design and Experiment on a Novel Adsorption Cooling Tube
一种新颖吸附制冷管的设计及性能实验研究 - A novel solar cooling tube and its performance experimental study
一种新颖的太阳能制冷管及其性能实验研究 - Study on Cycle Characteristics of a Solid Adsorption Cooling Tube Driven by Waste Heat
余热驱动吸附式冷管的循环特性研究 - A troubleshooting instance is given for MAZDA 6 that hot air blown out from out port of air conditioner in summer season, by checking cooling tube of air conditioner and actuator of mixing valve in A/ C box.
列举了通过检查空调制冷管路、A/C箱内混合气门执行器并采取相应措施，排除了一辆马自达6车在夏天开空调时出风口出热风的故障实例。 - Reason of condenser cooling tube cracking was HF fatigue failure due to high speed steam flow impacting copper pipe which caused vibration.
冷却管疲劳断裂的原因是由于高速汽流冲击使铜管产生振动而引起的高周疲劳断裂； - The study of refrigerating identity for a cooling tube driven by waste heat
废气余热驱动制冷管的制冷特性研究 - Study of the Fisher's Cooling System by Using Cooling Tube with Exhausted Heat
余热冷管在渔船制冷系统的应用研究 - Numerical analysis and experimental study for cooling tube flow with constant sectional area in varying centrifugal force field
变离心力场中等截面冷却通道的流量计算和实验研究 - Strength Analysis of Cooling Tube with Spiral Flute on Condenser
冷凝器螺纹槽冷却管的强度分析 - Fatigue and Static Load Strength Analysis of Titanium Circularly-Grooved Cooling Tube
钛波槽冷却管的疲劳及静载强度分析 - Based on the simulation of vacuum tightness test in various operation conditions of condenser, the affection of vacuum tightness test in various operation conditions of condenser on stress of cooling tube is analyzed.
通过对凝汽器在不同运行参数条件下汽轮机真空系统严密性试验的仿真，分析了凝汽器在不同运行条件下，真空系统严密性试验对凝汽器冷却管热应力的影响。 - The mechanical parameters of the cooling tube with spiral flute were measured by the tension and fatigue tests.
由拉伸和疲劳试验，测定了冷凝器用钛螺纹槽冷却管的力学参数； - For the forced circulation system, to avoid the excessive values of circulation water dynamic, every water cooling tube must be mounted throttle plate in the design.
对于强制循环系统，为了避免循环水动力的多值性，设计均要求在每一根水冷壁管设置节流孔板。 - Using combined barrel ensure the suitable processing technology and high work efficiency, meanwhile, slurry is cooled by water in cooling chamber and cooling tube.
采用组合式机筒，在保证加工工艺和提高工作效率的同时，在机筒中设计冷却室和冷却管来实现对浆料的冷却。 - The research work of this dissertation developed a new type of helium cooled solid blanket concept with two alternate cooling tube batches under the frame of ceramic blanket. Neutronics, thermal hydraulic and mechanical analyses have been carried out on the scale of demo-type fusion reactor.
本论文就是在固态包层的框架下，提出了一种新型双回路交叉氦冷固态包层概念，并在示范堆规模下进行了中子学、热工水力和应力分析。